Honeycomb Aluminum Vent Panels Series 210 - EMI Shield, RFI Shielding, EMI Shielding, RF Shields

EMI Shielding Products - EMI Shield, RFI Shielding, EMI Shielding, RF Shields

Home Company Products Custom Fabrication Glossary Sales Reps Contact

News:

February 21st, 2011
East Coast Shielding named as exclusive U.S. distributor for Instrument Plastics, Ltd. Click Here

October 15th, 2011
East Coast Shielding named distributor of SSP Silicone Lubricating Grease.

Phone:
(908) 852-9160

Fax:
(908) 852-9163

East Coast Shielding
37 RT 46
Hackettstown, NJ 07840
(Get Directions - Click Here)

Honeycomb Aluminum Vent Panels
Series 210

Honeycomb Aluminum Vent Panels 210 Series

East Coast Shielding aluminum shielded air vent panels are fabricated from an aluminum honeycomb medium installed in an aluminum frame. The honeycomb provides high levels of shielding with a minimum resistance to air flow.

APPLICATIONS:
East Coast Shielding honeycomb vents are recommended for installation in electronic equipment enclosures that require high levels of EMI shielding while allowing for adequate ventilation. East Coast Shielding honeycomb vents can be installed in applications requiring shielding on either the inlet or outlet air flows.

AVAILABLE CONFIGURATIONS:
East Coast Shielding honeycomb vents are typically constructed of 0.500"(12.70) thickness, 90 degree aluminum honeycomb, with a 0.125"(3.18) cell size. The honeycomb is also available in 0.250"(6.35) thickness and cell sizes of 0.062"(1.57) and 0.188"(4.78). For drip proof construction, the cells are also available slanted at 30, 45 and 60 degrees from the horizontal. For mounting, the panels are available with captive inserts, through holes or no holes. The completed assembly can be chromate conversion coated or tin plated for protection. East Coast Shielding honeycomb vents are supplied with an attached mesh, strip, or conductive silicone fabricated gasket. For shapes, sizes and materials not listed, please contact East Coast Shielding for additional information.

MATERIAL SPECIFICATIONS


• FRAME	• Aluminum alloy 6063-T4 per QQ-A-200/8
• HONEYCOMB	• MIL-C-7438
• FASTENER	• Aluminum captive insert, 8-32 UNC-3B
• CHROMATE FINISH	• MIL-C-5541C
• TIN-PLATING	• MIL-T-10727

EMI Shielding Performance: 1/8 Cell Size, 1/2 Thick

Standard Honeycomb Finish	H-Field	E-Field	Plane Wave
Standard Honeycomb Finish	100kHz	10MHz	1 GHz	10 GHz
Chem Film	40 dB	75 dB	60 dB	40 dB
Tin	70 dB	125 dB	100 dB	80 dB
Nickel	75 dB	130 dB	115 dB	95 dB

Cross-Cell Honeycomb Finish	H-Field	E-Field	Plane Wave
Cross-Cell Honeycomb Finish	100kHz	10MHz	1 GHz	10 GHz
Chem Film	60 dB	105 dB	90 dB	80 dB

OVERALL DIMENSIONS		EFFECTIVE AIR FLOW AREA			FRAME DIMENSIONS		HOLE SPACING		NO. FASTENERS		PART NUMBER
OVERALL DIMENSIONS		EFFECTIVE AIR FLOW AREA			FRAME DIMENSIONS		SIDE (W)	SIDE (L)	SIDE W	SIDE L
W	L	IN (CM)	A	B	C	D	E	F	SIDE W	SIDE L
3(76.20)	3(76.20)	4	2(50.80)	2(50.80)	1.25(31.75)	1.25(31.75)	-	-	1	1	210-0001
4(101.60)	4(101.60)	9(58)	3(76.20)	3(76.20)	1.75(44.45)	1.75(44.45)	-	-	1	1	210-0002
4(101.60)	6(152.40)	15(97)	3(76.20)	5(127.00)	1.75(44.45)	1.00(25.40)	-	3.50(88.90)	1	2	210-0003
4(101.60)	8(203.20)	21(135)	3(76.20)	7(177.80)	1.75(44.45)	0.75(19.05)	-	3.00(76.20)	1	3	210-0004
4(101.60)	12(304.80)	33(213)	3(76.20)	11(279.40)	1.75(44.45)	1.25(31.75)	-	3.00(76.20)	1	4	210-0005
5(127.00)	5(127.00)	16(103)	4(101.60)	4(101.60)	2.25(57.15)	0.75(19.05)	-	3.00(76.20)	1	2	210-0006
5(127.00)	7(177.80)	24(155)	4(101.60)	6(152.40)	2.25(57.15)	1.50(38.10)	-	3.50(88.90)	1	2	210-0007
5(127.00)	10(254.00)	36(232)	4(101.60)	9(228.60)	2.25(57.15)	1.25(31.75)	-	3.50(88.90)	1	3	210-0008
6(152.40)	6(152.40)	25(161)	5(127.00)	5(127.00)	1.00(25.40)	1.00(25.40)	3.50(88.90)	3.50(88.90)	2	2	210-0009
6(152.40)	8(203.20)	35(226)	5(127.00)	7(177.80)	1.25(31.75)	0.75(19.05)	3.00(76.20)	3.00(76.20)	2	3	210-0010
6(152.40)	12(304.80)	55(355)	5(127.00)	11(279.40)	1.00(25.40)	1.25(31.75)	3.50(88.90)	3.00(76.20)	2	4	210-0011
6(152.40)	18(457.20)	85(548)	5(127.00)	17(431.80)	1.00(25.40)	1.25(31.75)	3.50(88.90)	3.75(95.25)	2	5	210-0012
7(177.80)	7(177.80)	36(232)	6(152.40)	6(152.40)	1.50(38.10)	1.50(38.10)	3.50(88.90)	3.50(88.90)	2	2	210-0013
7(177.80)	10(254.00)	54(348)	6(152.40)	9(228.60)	1.50(38.10)	1.25(31.75)	3.50(88.90)	3.50(88.90)	2	3	210-0014
7(177.80)	14(355.60)	78(503)	6(152.40)	13(330.20)	1.50(38.10)	1.50(38.10)	3.50(88.90)	3.50(88.90)	2	4	210-0015
8(203.20)	8(203.20)	49(316)	7(177.80)	7(177.80)	2.00(50.80)	0.75(19.05)	3.50(88.90)	3.00(76.20)	2	3	210-0016
8(203.20)	12(304.80)	77(497)	7(177.80)	11(279.40)	0.75(19.05)	1.25(31.75)	3.00(76.20)	3.00(76.20)	3	4	210-0017
8(203.20)	16(406.40)	105(677)	7(177.80)	15(381.00)	0.75(19.05)	1.25(31.75)	3.00(76.20)	3.25(82.55)	3	5	210-0018
10(254.00)	10(254.00)	81(522)	9(228.60)	9(228.60)	1.25(31.75)	1.25(31.75)	3.50(88.90)	3.50(88.90)	3	3	210-0019
10(254.00)	14(355.60)	117(755)	9(228.60)	13(330.20)	1.25(31.75)	1.50(38.10)	3.50(88.90)	3.50(88.90)	3	4	210-0020
10(254.00)	18(457.20)	153(987)	9(228.60)	17(431.80)	1.25(31.75)	1.25(31.75)	3.50(88.90)	3.75(95.25)	3	5	210-0021
12(304.80)	12(304.80)	121(780)	11(279.40)	11(279.40)	1.25(31.75)	1.25(31.75)	3.00(76.20)	3.00(76.20)	4	4	210-0022
12(304.80)	16(406.40)	165(1064)	11(279.40)	15(381.00)	1.25(31.75)	1.25(31.75)	3.00(76.20)	3.25(82.55)	4	5	210-0023
12(304.80)	20(508.00)	209(1348)	11(279.40)	19(482.60)	1.25(31.75)	1.00(25.40)	3.00(76.20)	3.50(88.90)	4	6	210-0024
12(304.80)	24(609.60)	253(1632)	11(279.40)	23(584.20)	1.25(31.75)	1.25(31.75)	3.00(76.20)	3.50(88.90)	4	7	210-0025

Download PDF of FULL product specifications... Click Here

Welcome to ECS, your source for EMI Shielding, RF Shields and RFI Shielding, EMI/RFI Materials & Shielding needs. If you are looking EMI Shield, RF Shields, and RFI Shielding products. You've come to the right place. East Coast Shielding has been manufacturing & distributing EMI/RFI materials, gaskets & gasket materials, and die-cutting materials for nearly a decade. East Coast Shielding is specialized in Electromagnetic Interference (EMI) Shielding and Radio Frequency Interference (RFI) Shielding products. We are based in Hackettstown, New Jersey and have clients and customers located across the East Coast, throughout the United States, and around the world. East Coast Shielding is here to supply you with all of your EMI shield, and RFI material needs, by serving the electronics and commercial industries with high quality gaskets, gasket materials, and die-cutting materials. Whether you need a die cut, molded, or extruded material, we have the knowledge, expertise, and materials to meet your every need.